Safety inspection in accordance with ASR A1.7

ASR A1.7 sets out in detail the requirements of the Workplace Regulations regarding doors and gates – and stipulates that power-operated gate systems must undergo an annual safety inspection carried out by qualified personnel. Plattenhardt + Wirth Montage GmbH can assist you with your operator obligations: inspection, measurement and documentation.

60+Years of experience
5.000+Projects since 1965
12Locations in Germany and Austria

Leading companies place their trust in Plattenhardt + Wirth

ALDI South
ALDI Nord
Hofer
EDEKA
Count Palatine
Milei
Vetter Pharma
Galliker
Goldsteig
Wiesenhof
Nestlé
Mifroma
Borgmeier Frischgeflügel logo
Customer logo Logo_UlmerFleisch_farbig
Rügenwalder Mühle
kellermann logo – persönlich frisch
Your added peace of mind

ASR A1.7: This must be carried out once a year

ASR A1.7 (Technical Regulations for Workplaces – Doors and Gates) is aimed at employers and sets out in detail the requirements for doors and gates as laid down in the Workplace Regulations. For every operator of commercially used, power-operated gate systems, this means that every gate system must undergo an annual safety inspection – including a measurement of operating forces at the closing edges – carried out and documented by a competent person.

  • Inspection by competent persons: Trained specialists who have completed training for safety inspections.
  • Measurement included: Operating force measurement at the closing edges of power-operated doors and gates.
  • Traceably documented: Inspection report as evidence for authorities, insurers and certifiers.
  • Defects remedied from a single source: Repairs and spare parts directly from the same contact.
A service technician inspecting a cold store door

Service brochure

ASR A1.7, Maintenance and servicing of cold room doors and gates at a glance – in brief. (PDF, 1,7 MB)

Download PDF
What is assessed

An overview of the scope of testing in accordance with ASR A1.7

Force measurement in industrial applications

Measurement of closing forces at the closing edges of power-operated doors and gates.

Opening monitoring

Testing of automatic door monitoring systems and safety devices.

Hazardous areas

Identification of potential hazards, such as trip hazards, in door and gate areas.

Condition & Deviations

Damage and discrepancies are recorded – so that they can be rectified promptly.

Documentation

Scheduled recording of the inspection – as evidence of your operator obligations.

No grandfathering clause

The state of the art is what counts – even older systems must meet the requirements.

Why Plattenhardt + Wirth

Why is Plattenhardt + Wirth the right partner for the ASR audit?

Anyone who has been manufacturing and maintaining power-operated cold store doors and gates for decades is also well-equipped to inspect them: Plattenhardt + Wirth Montage GmbH combines the ASR-A1.7 inspection directly with maintenance on request – one appointment, one point of contact.

60+A family-run business since 1965

Innovation, hard work and courage – now in its second generation, with over 60 years’ project experience.

5.000+completed projects

From individual cold stores to turnkey facilities with production, cold storage and office space.

12Locations in Germany and Austria

Local presence and rapid response times – both in project work and in our service provision. We also operate in Switzerland.

250+Staff within the network

Our own planning, installation and service teams – a single point of contact for your project.

Your path to a documented audit

Four steps to fulfilling your operator’s obligations

A dedicated point of contact will guide you through every stage – from the initial assessment to the rectification of defects.

  1. Enquiries & Stock

    Tell us about your power-operated doors and gates – we’ll advise you on the scope of testing and your obligations under ASR A1.7.

    Free of charge
  2. Date

    The inspection is scheduled for a fixed date – and can be combined with maintenance on request, so that a single appointment is sufficient for both.

    Predictable
  3. Inspection by qualified personnel

    Measurement of operating forces at the closing edges, testing of opening monitoring and hazard points – in accordance with the applicable regulations.

    1 contact person
  4. Test report & rectification

    You will receive comprehensive documentation – if you wish, we will rectify any faults found straight away, with repairs and spare parts all from a single source.

    Quick & easy
Step 1 is free of charge

Start with a no-obligation enquiry

Whether it’s a single door system or an entire portfolio across multiple sites – we take care of inspection, documentation and remedial work. And beyond that:

  • Door & gate maintenance
  • Repair
  • Spare parts
Key facts

Understanding ASR A1.7: Obligations, Assessment, Consequences

Furthermore, under the Workplace Regulations, the latest state of the art must be taken into account – power-operated doors and gates are therefore not subject to grandfathering provisions. With over 60 years’ experience in this field, we can help you run your business successfully and safely: our experts will carry out the inspection, document the results in a transparent manner and, if required, rectify any defects found straight away – all from a single source.

What is ASR A1.7?

The Technical Regulations for Workplaces – Doors and Gates are aimed at employers and set out in detail the requirements for doors and gates arising from the Workplace Regulations (ArbStättV).

Operators’ obligations

ASR A1.7 stipulates that every power-operated door system used for commercial purposes must undergo an annual safety inspection – including a measurement of the operating forces at the closing edges – carried out and documented by a qualified person. In addition, regular checks must be carried out to ensure that employees are not exposed to any hazards at the workplace.

No grandfathering for old installations

Under the Workplace Regulations, the latest state of the art must be taken into account – power-operated doors and gates are therefore not exempt from these requirements. Even older systems must comply with current requirements or be retrofitted.

Who is authorised to carry out checks

Only qualified personnel: trained specialists who have successfully completed a safety inspection training course. Our service engineers hold this qualification – and have decades of practical experience with cold room doors and gates.

If defects are found

Any non-conformities and damage are recorded in the test report and should be rectified promptly. On request, we can take care of this directly – providing repairs and spare parts from a single source, without the need for a second service provider.

Combining inspection and maintenance

The most cost-effective option is to have the ASR inspection carried out as part of the maintenance schedule: one appointment, one point of contact, one set of records – and doors and gates that are both inspected and serviced at the same time.

Frequently Asked Questions

FAQ on safety inspections in accordance with ASR A1.7

Who is authorised to carry out the safety inspection in accordance with ASR A1.7?

The inspection may only be carried out by qualified personnel – trained specialists who have successfully completed a safety inspection training course. Our service engineers hold this qualification.

Which safety risks are assessed in accordance with ASR A1.7?

The inspection covers potential hazards such as trip hazards, the closing force of doors and gates, and automatic opening monitoring systems. Any discrepancies or damage are recorded and should be rectified promptly – the health and safety of your staff is always the top priority.

How often must the safety inspection be carried out?

ASR A1.7 stipulates that power-operated gate systems used for commercial purposes must undergo an annual safety inspection – accordingly, we carry out the inspection on an annual basis, in accordance with the applicable regulations. The simplest way is to include this as part of the maintenance plan.

What happens if defects are found during the inspection?

Any discrepancies and damage are recorded in the test report and should be rectified promptly. On request, we can carry out the repairs directly – with repairs and spare parts all from a single source.

What documentation requirements apply under ASR A1.7?

ASR A1.7 requires the systematic recording of safety checks, accidents, safety incidents and hazards; periodic safety reports may also be required. We document the inspection in a traceable manner – as evidence for the authorities, insurers and certification bodies.

Next step

Have you already booked your next ASR test?

Whether it’s a single gate system or a complete installation: please get in touch with us to discuss your requirements – we’ll be in touch shortly.

Request an inspection now